1. Appearance

Hotel case goods mostly uses particleboard, medium-density fiberboard and other man-made boards as the base material, Whether the surface board has defects such as scratches, indentations, bubbling, degumming, peeling, and glue marks. The wood grain pattern should also be natural and smooth.

2. Craftmanship

Inherent quality of panel bespoke furniture determined by the appearance quality that can be seen from the surface. Hotel furniture is made by cutting, sawing, decorating, sealing, and then assembled by formed panels, the quality of the board edge cutting and surface decoration and splicing combination process make the foundation of good quality hotel furniture.

3. Cutting

Generally speaking, if the edge of the board is flat and the angle is good after the board is cut, there will be no tilting  after the furniture is made.

4. Corner

The joint corner craftmanship of furniture mainly depends on whether the glue on the decorative parts is uniform, whether the PVC edge color and wood grain are consistent, whether the paste is firm, and whether the trimming is smooth.

5. Splicing

The splicing combination process mainly depends on the drilling tidiness, the connector need to be reinforced for installation, Any looseness must be fixed by hand or machine, the door and drawer hardware need to be smooth to to open or push

6. Joints

The quality of the connection parts that cannot be ignored

wood-based panel furniture generally uses metal parts and plastic parts as fastening connectors, so the quality of the connectors also determines the internal quality of the furniture. Eligible metal parts need to be smooth on surface, with good electroplating effect, and no rust or burrs.  The forceful parts in the application must have certain strength and flexibility.