The main principles for hoteliers to select hotel furniture supplier is that a company who can require their less energy and cost. And for hotel furniture manufacturer, they seek the same goal. Both hospitality furniture seller and contract furniture buyer would often emphasizes the cost factor.

The following 6 points are important and cost-effective

tips for purchasing hotel furniture .

1) Appearance

　　 The quality of appearance first requires the furniture countertop to be in fine workmanship, fine decoration, clear and beautiful texture. Guest room furniture usually apply particleboard, medium-density fiberboard, blockboard, laminate , plywood  etc.and veneer is commonly applied on top of it.

Failure to pay attention to the properties of the material and the correct use method will often cause the board to warp. The structural characteristics of the cladding material on the back and the front of the panel must the same or similar, the moisture content of the base material is generally required to be 6-10%, and the selected materials should be the same batch as possible. In the workshop processing, try to shorten the time of loading and pressing, different material characteristics and moisture content of cladding materials, commercial furniture suppliers should pay attention to board coating details　　

2) Structural strength

Guest room furniture is partial fixed furniture. Wood screws, hardware connectors and adhesives are used as joining methods. When using materials, furniture factory should pay attention to different material characteristics, such as particleboard and medium-density board, which have poor nail holding power,

Try to avoid these material for adhesive areas.

In places that require frequent activities or strong nail-holding power, such as door hinge screws, and bottom rail screws, Particular attention should be paid to the hardware pendants on the wall of the bed screen and the picture frame or use wood instead of reinforcement.

3) Material cost

Try to use low-cost materials while also meeting the requirements . While using large surface materials, pay attention to the use of the same kind of small materials to comprehensively improve the utilization rate of plates.

Hotel room furniture is generally large in quantity, the CNC system for mould is ideal.

4) Efficient production

The production need to be easy to process, and the process can be costs and improve efficiency. Good manufacturing management can be checked during first time inspection. Try to inspect your new hotel furniture supplier while they are in mass production. Their production line should be smooth and tidy.

5) Transportation and installation

It requires special consideration, for those hotel floors are high, and the furniture is required to be light in weight and easy to transport. In particular ( as an example ), some conjoined bed backs and some extended writing desks cannot be transported by elevators. How to transport safely depends on the weight and structure of the furniture.

6) Safety performance

Usually Chinese hotel furniture supplier will not consider cost for material with additional safety features. Because general China hotels do not have clear regulations, Only hotel furniture manufacturer with rich oversea market experience will understand some regulations for hotel furniture safety requirement such as fire-resistance and free formaldehyde requirements. Fireproof panels, anti-scalding paint, flame retardant fabrics, water proof material etc can be provided with clear requirement from customers.