The main material used in modern hotel furniture is wood, of which solid wood furniture occupies the main battlefield of the hotel furniture consumer, but most people tend to only look at the style and board when buying wooden turnkey furniture. I don't know much about some details, so I don't think it matters. In fact, when purchasing wooden contract furniture, especially solid wood hotel and home furniture, below are three key points to pay attention to: 

a. the moisture content of the wood; 

b. the treatment of the lacquer; 

c.the connection of tenon and tenon . 

When inspecting hotel furniture, you should check the interior of the furniture to see if there is any decay. If there are insect eyes or foam in the wood, it indicates that the drying time is insufficient. For some furniture with doors , you should open the door to smell . If the smell is pungent, it means that the formaldehyde content is too high, which will cause harm to the human body.

4. The water content ( also understood as moisture rate ) of hotel furniture must not exceed 12%, otherwise the wood is easy to bend and deform. When buying, you can feel whether there is dampness at the bottom of the hotel furniture or the unpainted areas inside. If it feels damp, the water content ( also understood as moisture rate ) exceeds 50% and cannot be used. You can also judge whether the water content ( also understood as moisture rate ) exceeds the standard by the degree of water saturation. Sprinkle a small amount of water on the wood, and the bleed is slow or not, indicating that the water content ( also understood as moisture rate ) is high.

5. Environmental protection measures (eco-friendly features)

Such as particle board, density board, glue, paint, etc., will release harmful gases to the human body. In addition, the hotel bedroom and apartment rooms are relatively closed, and the harsh and pungent gas in the early stage will directly affect the room occupancy rate. The environmental protection of hotel indoor furniture has become the most important factor for modern furniture customers to stay in hotels. Although it is inevitable for custom hotel furniture manufacturer to produce harmful gases during the production process, the quality of the materials used and the level of edge banding technology will directly affect the release of harmful gases. Commercial furniture consumers can ask the merchants when choosing hotel furniture. Ask for relevant certificates, observe more details,  The environmental protection of contract furniture must be considered in right place.